WHAT IS A “SUPER INTELLIGENT” TURBO TIMER?

Vehicles with turbo chargers or super chargers require “cool down” time after engine activity. Turbo Timers allow the car to idle for a short time after you’ve come to a stop and switched off the ignition. This starts cooling down the turbo bearing(s) and prevents the oil from coking inside the turbo.  If the oil cokes inside the turbo, overtime, the carbon varnish and deposits will result in premature wear.  In addition, it also lets the exhaust manifold - and the rest of the engine – gradually come back down to normal temperatures.  But the trouble with a normal turbo timer is the idle-on time is pre-set. So whenever you turn off the car, the engine will run for a static duration of 15 seconds, 30 seconds or a minute – whatever you have the timer set for. If you drive down the street to get milk from a grocery store – your engine will still run for whatever pre-set time you set it at. If it’s set at 3 minutes, you’re just wasting gas! On the flip side, if you were late for work and drove like a maniac, you don’t want it to cool down for only 30 seconds.  What you need is an Intelligent Turbo Timer. Instead of simply always leaving the car idling for a pre-set period, it actively and dynamically watches how you drive.  Static was yesterday, Dynamic is now!

Here’s how it works:


Zenesis has developed a patent-pending system with complex algorithms to calculate the optimal engine run time to cool down your systems. How?

  1. Monitors tach/rpm activity (not necessarily how FAST  you were driving, but how rigorously you were driving on the RPM band).
  2. Monitors drive duration (5 minutes? 5 hours? Obviously the longer you drive, the more cooling down it needs).
  3. Monitors drive sequence (even if you were racing around on the highway, if you get stuck for 30 minutes in traffic afterwards, you just cooled down your car in traffic. There’s no need for you to have the engine running just because you drove hard 30 minutes ago before the traffic hit).

Developed hand-in-hand with experts in turbo systems, Zenesis has developed the Super Intelligent Turbo Timer that will calculate the optimal engine run time to cool down the systems PROPERLY, while reducing unnecessary idling time. Best of all, this system is BUILT IN! There’s no extra parts to purchase or extra installation required. As long as you have a remote starter from Zenesis, you have the option to use this. It comes available in normal pre-set time settings, or Automatic Intelligent Turbo Timer “NORMAL” mode, as well as Automatic Intelligent Turbo Timer “Extreme” mode. The “Extreme” mode is when you are racing or going on tracks – it amplifies the run time.
With the Zenesis Super Intelligent Turbo Timer, just set it and forget it! It may take some time to get used to it, but just let it do the calculating for you – each and every time you drive.